Electrostatic precipitator porcelain columns are used for electrostatic precipitator support and suspension of corona electrode suspension frames, serving as support and high-voltage insulation. Porcelain column insulators are suitable for use under working conditions where the working temperature does not exceed 500 ℃, the DC working voltage is 72KV to 120KV, and the installation site is located at an altitude of not more than 1000m.
Porcelain post insulators are manufactured in strict accordance with GB/T772-2005 "Technical Conditions for High Voltage Insulators and Porcelain Insulators for Electrostatic Precipitators" (JB/T6746.3-93). Insulators are made of porcelain pieces and the vicinity of the upper and lower metal using high-temperature resistant adhesive. The contact part between the end face of the porcelain piece and the vicinity of the metal is padded with high-temperature resistant elastic pads. The bonding part of the porcelain piece adopts knurled, sanded, and other structures to prevent loosening and twisting to ensure mechanical strength. The surface of porcelain parts shall be painted with white glaze or unglazed, and the metal surface shall be painted with high-temperature paint.
When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porcelain bottle and installation location are clean and dry, free of moisture such as oil stains, and check whether the voltage meets the requirements) before operating the equipment. Sudden temperature rise and drop can cause the porcelain bottle to explode due to temperature differences.
95瓷塔式承重瓷瓶,95瓷侧拉轴L=515,湿电绝缘拉杆JLG620-650/36V陶瓷+铁,95瓷防露防腐型绝缘拉棒JFL-072-100D Ⅵ型-2F,95瓷拉杆,95瓷轴,锥形绝缘轴WBT4.0-4,高分子95瓷顶部振打棒绝缘轴T501-1,70-520,JZ3-520,电除尘绝缘瓷套,双耳型95瓷轴L=630mm,高压瓷瓶,瓷套管,瓷绝缘子7231,铜川电瓷,振打瓷瓶QE-1151,直流72KV耐温≤500℃铜川电瓷厂铁塔电瓷牌静电除焦县丝φ2.3mm 316L电极丝电晕线电晕丝电极丝XT-316L静电除焦塔,阴极吊挂瓷瓶YQ20121高压静电捕焦油器FW/HL-8