静电除尘器用瓷绝缘子专家

 

 

振打瓷转轴95磁转轴绝缘瓷磁套95瓷转轴绝缘瓷套筒95瓷振打棒锥形绝缘轴T501-2高分子振打棒电除雾石英管电除尘石英管陶瓷重锤石英穿墙套管石英盖板锥形石英管电除尘工业电瓷承重瓷瓶95瓷穿墙套管95瓷拉杆石英瓷限位开关A1011压力开关A39855瓷转轴95瓷套筒95瓷支柱95瓷振打棒锥形绝缘轴承压绝缘子宣化电瓷高压瓷缸电除雾石英管电除尘锥形石英管电晕丝线陶瓷重锤电瓷转轴电瓷套筒振打瓷轴石英穿墙套管铜川电瓷厂铁塔电瓷绝缘子阴极悬挂瓷瓶阴极吊挂瓷瓶电除尘高压瓷瓶阴极振打瓷转轴振打瓷轴湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100DJLG620-650JF66-650-J

铜川电磁材料永远纯净铁塔电瓷制造有限责任公司 

(铜川铜川瓷瓶特种陶瓷制造商)铁塔电磁制造有限责任公司铜川瓷套铜川瓷转轴铜川承压绝缘子

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷铁塔牌承压绝缘子绝缘轴石英管湿式电除尘绝缘拉棒杆

铜川铁塔 Esp轴绝缘子-材料C795,C795电除尘器穿墙套管,C795 Esp固体支撑绝缘子,C795静电除尘器支撑绝缘子,Esp轴绝缘子-材料C130(技术标准:按照国家标准GB/T772-2005 《高压绝缘子瓷件技术条件》JB/T5909-2010、JB/T6746.1-1993、JB/T6746.2-1993《电除尘器用瓷绝缘子》制造。)

 

 

技术标准:按照国家标准GB/T772-2005 《高压绝缘子瓷件技术条件》JB/T5909-2010、JB/T6746.1-1993、JB/T6746.2-1993《电除尘器用瓷绝缘子》制造。

Technical standards: manufactured in accordance with the national standards GB/T772-2005 "Technical Conditions for High Voltage Insulator Porcelain Parts" JB/T5909-2010, JB/T6746.1-1993, and JB/T6746.2-1993 "Porcelain Insulators for Electrostatic Precipitators".

....................................................................................................................................................................................................................................................................................

 

Esp轴绝缘子-材料C795
产品描述
ESP轴绝缘体用于放电电极的振打,起到旋转和隔离器的作用。
产品采用陶瓷材料C795生产,即使在高压下也能承受500ºC以上的工作温度。
轴绝缘子采用硅酸盐水泥或耐高温胶粘与铸铁法兰组装而成。为了防止端部松动和转动,设置了缓冲层,从而保证了机械强度根据工作情况,我们建议客户选择不同的材料,以确保ESP的稳定运行。建议如下:
材料C130(氧化铝>50%)工作温度:<250ºC;
材料C610(氧化铝>60%)工作温度:<350ºC;
材料C795(氧化铝>95%)工作温度:>500ºC;

 

Esp Shaft Insulators-Material C795

Product Description
The ESP Shaft Insulator  is used for the rapping of discharge electrodes, acting as the role of rotation and isolator.

Produced with the porcelain material C795, the products could withstand more than 500 ºC working temperature even under the high voltage.

The shaft insulator assembled with the cast iron flanges by Portland cement or high temperature resisting gluing. A buffer layer is put on for the purpose of preventing loosening and turning from the end so the mechanical strength is guaranteed

According to the working circumstances, we suggest our customer to choose the different material to ensure the ESP's stable running. Suggestions as following: 

    Material C130(Alumina>50%) Working temperature:<250ºC;
    Material C610(Alumina>60%) Working temperature:<350ºC;
    Material C795(Alumina>95%) Working temperature:>500ºC;

Other features of our products:

High tension, High duration and High resistivity

 

....................................................................................................................................................................................................................................................................................

 

C795电除尘器穿墙套管

产品描述

穿墙套管用于支撑和隔离电晕驻极体母线穿过ESP外壳的地方。根据结构分为两种:组装套管和裸瓷本体。

产品采用陶瓷材料C795生产,即使在高压下也能承受500ºC以上的工作温度。

组装的穿墙套管由瓷体和金属配件组成。这两个部分通过波特兰胶凝或耐热胶凝结合在一起。瓷体与金属配件之间采用弹性垫和缓冲层,防止松动。它有助于保证机械强度。

根据工作情况,我们建议客户选择不同的材料,以确保ESP的稳定运行。建议如下:

材料C130(氧化铝>50%)工作温度:<250º

 

C795 Electrostatic Precipitator Wall Through Bushings
Product Description
The wall-through bushing is used for support and isolates the place where the corona electrets bus bar gets through the ESP shell. There're two types of them according to the structure: assembled bushing and bare porcelain body.

Produced with the porcelain material C795, the products could withstand more than 500 ºC working temperature even under the high voltage.

The assembled wall-through bushing consists of porcelain body and metal accessories. These two parts are combined by Portland cementing or the thermal-resisting gluing. Elastic pad and buffer layer are used between the porcelain body and metal accessory to prevent loosening. It helps to guarantee the mechanical strengths.

According to the working circumstances, we suggest our customer to choose the different material to ensure the ESP's stable running. Suggestions as following: 

Material C130(Alumina>50%) Working temperature:<250º

 

....................................................................................................................................................................................................................................................................................

 

C795 Esp固体支撑绝缘子

产品描述

ESP实心支撑绝缘子用于支撑放电电极的悬挂框架,也用于高压绝缘。

产品采用陶瓷材料C795生产,即使在高压下也能承受500ºC以上的工作温度。

支柱绝缘子由瓷本体和金属附件组成。这两个部分通过波特兰胶凝或耐热胶凝结合在一起。瓷体与金属配件之间采用弹性垫和缓冲层,防止松动。它有助于保证机械强度。

根据工作情况,我们建议客户选择不同的材料,以确保ESP的稳定运行。建议如下:

材料C130(氧化铝>50%)工作温度:<250ºC;

材料C610(氧化铝>60%)工作温度:<350ºC;

材料C795(氧化铝>95%)工作温度:>500ºC;

 

C795 Esp Solid-Support Insulators
Product Description
The ESP Solid-core Support Insulator is used for supporting hanged frame of discharge electrodes and also for high-voltage insulation.

Produced with the porcelain material C795, the products could withstand more than 500 ºC working temperature even under the high voltage.

The post support insulator consists of porcelain body and metal accessories. These two parts are combined by Portland cementing or the thermal-resisting gluing. Elastic pad and buffer layer are used between the porcelain body and metal accessory to prevent loosening. It helps to guarantee the mechanical strengths.

According to the working circumstances, we suggest our customer to choose the different material to ensure the ESP's stable running. Suggestions as following: 

Material C130(Alumina>50%) Working temperature:<250ºC;
Material C610(Alumina>60%) Working temperature:<350ºC;
Material C795(Alumina>95%) Working temperature:>500ºC;

 

....................................................................................................................................................................................................................................................................................

 

C795静电除尘器支撑绝缘子

产品描述
ESP支撑绝缘子用于放电电极悬挂架的悬挂物穿过电场外壳的地方的密封和高压绝缘。它是电除尘器绝缘结构中最重要的部分。
该产品采用陶瓷材料C795生产,即使在120kV以上的高压下也能承受500ºC以上的工作温度。
根据产品的外观特点,有三种类型:
1、圆柱形支撑绝缘子。 
2、锥形支撑绝缘子。
3、支撑绝缘子形状异常。
根据工作情况,我们建议客户选择不同的材料,以确保ESP的稳定运行。建议如下:
材料C130(氧化铝>50%)工作温度:<250ºC;
材料C610(氧化铝>60%)工作温度:<350ºC;
材料C795(氧化铝>95%)工作温度:>500ºC;

 

C795 Electrostatic Precipitator Support Insulators
Product Description
The ESP support insulator is used for sealing and high-voltage insulation of the place where the suspension of the hanged frame of discharge electrode gets through the casing of the electric field. It's the most important part of the Electrostatic Precipitator's insulation structure.

Produced with the porcelain material C795, the products could withstand more than 500 ºC working temperature even under the high voltage over 120kV.

According to the out-looking features of the products, there're three types:

1, Cylindrical support insulator. 
2, Conical support insulator.
3,  Abnormal shape suport insulator.

According to the working circumstances, we suggest our customer to choose the different material to ensure the ESP's stable running. Suggestions as following: 

Material C130(Alumina>50%) Working temperature:<250ºC;
Material C610(Alumina>60%) Working temperature:<350ºC;
Material C795(Alumina>95%) Working temperature:<500ºC;

 

....................................................................................................................................................................................................................................................................................

 

C610静电除尘器支撑绝缘子

产品描述

ESP支撑绝缘子用于放电电极悬挂架的悬挂物穿过电场外壳的地方的密封和高压绝缘。它是电除尘器绝缘结构中最重要的部分。

该产品采用陶瓷材料C610生产,即使在高压下也能承受350ºC以上的工作温度。

根据产品的外观特点,有三种类型:

1、圆柱形支撑绝缘子。 

2、锥形支撑绝缘子。

3、支撑绝缘子形状异常。

根据工作情况,我们建议客户选择不同的材料,以确保ESP的稳定运行。建议如下:

材料C130(氧化铝>50%)工作温度:<250ºC;

材料C610(氧化铝>60%)工作温度:<350ºC;

材料C795(氧化铝>95%)工作温度:<500ºC;

 

C610 Electrostatic Precipitator Support Insulators
Product Description
The ESP support insulator is used for sealing and high-voltage insulation of the place where the suspension of the hanged frame of discharge electrode gets through the casing of the electric field. It's the most important part of the Electrostatic Precipitator's insulation structure.

Produced with the porcelain material C610, the products could withstand more than 350 ºC working temperature even under the high voltage.

According to the out-looking features of the products, there're three types:

1, Cylindrical support insulator. 
2, Conical support insulator.
3,  Abnormal shape suport insulator.

According to the working circumstances, we suggest our customer to choose the different material to ensure the ESP's stable running. Suggestions as following: 

    Material C130(Alumina>50%) Working temperature:<250ºC;
    Material C610(Alumina>60%) Working temperature:<350ºC;
    Material C795(Alumina>95%) Working temperature:<500ºC;

 

...................................................................................................................................................................................................................................................................................             

Esp轴绝缘子——材料C130

产品描述

ESP轴绝缘体用于放电电极的振打,起到旋转和隔离器的作用。

该产品采用C130陶瓷材料生产,即使在高压下也能承受250ºC以上的工作温度。

轴绝缘子采用硅酸盐水泥或耐高温胶粘与铸铁法兰组装而成。为了防止端部松动和转动,设置了缓冲层,从而保证了机械强度

根据工作情况,我们建议客户选择不同的材料,以确保ESP的稳定运行。建议如下:

材料C130(氧化铝>50%)工作温度:<250ºC;

材料C610(氧化铝>60%)工作温度:<350ºC;

材料C795(氧化铝>95%)工作温度:>500ºC;

我们产品的其他功能:高电压、高持续时间和高电阻率

 

Esp Shaft Insulators-Material C130
Product Description
The ESP Shaft Insulator  is used for the rapping of discharge electrodes, acting as the role of rotation and isolator.

Produced with the porcelain material C130, the products could withstand more than 250 ºC working temperature even under the high voltage.

The shaft insulator assembled with the cast iron flanges by Portland cement or high temperature resisting gluing. A buffer layer is put on for the purpose of preventing loosening and turning from the end so the mechanical strength is guaranteed

According to the working circumstances, we suggest our customer to choose the different material to ensure the ESP's stable running. Suggestions as following: 

Material C130(Alumina>50%) Working temperature:<250ºC;
Material C610(Alumina>60%) Working temperature:<350ºC;
Material C795(Alumina>95%) Working temperature:>500ºC;

Other features of our products:

High tension, High duration and High resistivity t

 

....................................................................................................................................................................................................................................................................................