静电除尘器用瓷绝缘子专家

 

 

振打瓷转轴95磁转轴绝缘瓷磁套95瓷转轴绝缘瓷套筒95瓷振打棒锥形绝缘轴T501-2高分子振打棒电除雾石英管电除尘石英管陶瓷重锤石英穿墙套管石英盖板锥形石英管电除尘工业电瓷承重瓷瓶95瓷穿墙套管95瓷拉杆石英瓷限位开关A1011压力开关A39855瓷转轴95瓷套筒95瓷支柱95瓷振打棒锥形绝缘轴承压绝缘子宣化电瓷高压瓷缸电除雾石英管电除尘锥形石英管电晕丝线陶瓷重锤电瓷转轴电瓷套筒振打瓷轴石英穿墙套管铜川电瓷厂铁塔电瓷绝缘子阴极悬挂瓷瓶阴极吊挂瓷瓶电除尘高压瓷瓶阴极振打瓷转轴振打瓷轴湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100DJLG620-650JF66-650-J

铜川电磁材料永远纯净铁塔电瓷制造有限责任公司 

(铜川铜川瓷瓶特种陶瓷制造商)铁塔电磁制造有限责任公司铜川瓷套铜川瓷转轴铜川承压绝缘子

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷铁塔牌承压绝缘子绝缘轴石英管湿式电除尘绝缘拉棒杆

绝缘轴95瓷振打棒YJF520-70,高分子锥形绝缘轴70-520\T501-1\T501-2,绝缘子轴JZ3-520型,湿式电除尘横式瓷瓶,95瓷,50瓷,60瓷,石英,穿壁瓷套管,瓷轴JZ3-520,φ65 L=520mm\电袋复除尘器8FSQ-90,电除尘高压直流隔离开关GN3-72/3-4S72KV3A,CLYDE克莱德限位开关A1011,圆顶阀导向限位开关A2033,95瓷防露型绝缘拉棒

 

 

绝缘轴95瓷\高分子\电除尘顶部振打棒绝缘子瓷轴

 

静电除尘器用顶部振打轴用于静电除尘器电晕极侧部传动振打清灰装置,起传动和绝缘作用。绝缘子适用于工作温度不超过160-500℃、直流工作电压72KV~100KV,安装地点海拔高度不超过1000米的工作条件下使用。

绝缘子严格按照GB/T772-2005《高压绝缘子瓷件 技术条件》和B/T6746。3-1993《静电除尘器用瓷绝缘子》制造。瓷件表面施白釉或棕釉。


注:不同材质等级的绝缘子可在≤160℃、≤500℃、工作电压为72-100KV,环境中使用。
使用各种瓷瓶绝缘子产品时必须安装平整受力均匀,运行设备前先给瓷瓶及安装位置加热烘干12-24小时左右(保证瓷瓶及安装位置清洁干燥,不能有油污等潮湿现象,检查电压是否符合要求)才能运行设备),突然升温降温会导致温差引起瓷瓶炸裂。

 

The top rapping shaft for electrostatic precipitators is used to drive the rapping and dust cleaning device at the corona electrode side of the electrostatic precipitator, serving as a transmission and insulation role. Insulators are suitable for use under working conditions where the working temperature does not exceed 160-500 ℃, the DC working voltage is 72KV to 100KV, and the altitude of the installation site does not exceed 1000m.
Insulators shall strictly comply with GB/T772-2005 Technical Conditions for High Voltage Insulator Porcelain Parts and B/T6746. Manufacture of Porcelain Insulators for Electrostatic Precipitators (3-1993). The surface of porcelain pieces shall be painted with white or brown glaze.
Note: Insulators of different material grades can be used in environments ≤ 160 ℃, ≤ 500 ℃, and the working voltage is 72-100KV.
When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porcelain bottle and installation location are clean and dry, free of moisture such as oil stains, and check whether the voltage meets the requirements) before operating the equipment. Sudden temperature rise and drop can cause the porcelain bottle to explode due to temperature differences.

 

顶部锥形轴(直流电压72KV~120KV)可按需方尺寸定制
Top tapered shaft (DC voltage 72KV~120KV)Can be customized according to the size of the buyer

TP52-7 YP,TP85-45 YP,TP506-65 YP,TP60-40 YP,TP60-43 YP,TP60-48 YP,TP70-45 YP,TP43-39 YP

 

 

95瓷陶瓷顶部振打棒YJF520-70高分子锥形绝缘轴振打绝缘子YJF600-70