静电除尘器用瓷绝缘子专家

 

 

振打瓷转轴95磁转轴绝缘瓷磁套95瓷转轴绝缘瓷套筒95瓷振打棒锥形绝缘轴T501-2高分子振打棒电除雾石英管电除尘石英管陶瓷重锤石英穿墙套管石英盖板锥形石英管电除尘工业电瓷承重瓷瓶95瓷穿墙套管95瓷拉杆石英瓷限位开关A1011压力开关A39855瓷转轴95瓷套筒95瓷支柱95瓷振打棒锥形绝缘轴承压绝缘子宣化电瓷高压瓷缸电除雾石英管电除尘锥形石英管电晕丝线陶瓷重锤电瓷转轴电瓷套筒振打瓷轴石英穿墙套管铜川电瓷厂铁塔电瓷绝缘子阴极悬挂瓷瓶阴极吊挂瓷瓶电除尘高压瓷瓶阴极振打瓷转轴振打瓷轴湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100DJLG620-650JF66-650-J

铜川电瓷电磁材料永远纯净铁塔电瓷制造有限责任公司 

(铜川铜川瓷瓶特种陶瓷制造商)铁塔电磁制造有限责任公司铜川瓷套铜川瓷转轴铜川承压绝缘子铜川电瓷厂家

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷tieta牌铁塔湿电除尘承压绝缘子瓷转轴绝缘瓷套石英管绝缘拉棒瓷拉杆绝缘轴支撑承重高压瓷瓶

95瓷承重绝缘瓷套QEB87/CJW,JD330-52-60,XTL/J09627φ330*520,JH072/500DV-4F,A,承压绝缘体JD27-37-60,JZTφ370-600,QE-75/B95,JD26-48-70,锥形95瓷套筒管JZTφ487-700,XTL/09629-X,JH-120/500DⅡ-9,JH-120-500DV-3FL,防露型支撑瓷套XTL-J096503F,

 

95瓷承重绝缘瓷套

静电除尘器支撑瓷套管用于电晕极悬挂框架吊杆穿过场壳体处的密封和绝缘保护。根据产品的外形分为直形瓷套管和锥形瓷套管以及异型瓷套管。

 

瓷套管严格按照GB/T772-2005《高压绝缘子瓷件 技术条件》和B/T6746。3-1993《静电除尘器用瓷绝缘子》制造。瓷套管适用于工作温度为500℃、直流工作电压72KV~110KV,安装地点海拔高度不超过1000米的工作条件下使用,外表面无釉研磨,两端面研磨。

使用各种瓷瓶绝缘子产品时必须安装平整受力均匀,运行设备前先给瓷瓶及安装位置加热烘干12-24小时左右(保证瓷瓶及安装位置清洁干燥,不能有油污等潮湿现象,检查电压是否符合要求)才能运行设备),突然升温降温会导致温差引起瓷瓶炸裂。

 

The electrostatic precipitator support porcelain bushing is used for sealing and insulation protection at the point where the corona electrode suspension frame suspender passes through the field housing. According to the appearance of the product, it is divided into straight shaped porcelain bushing, tapered porcelain bushing, and special-shaped porcelain bushing.
The porcelain bushing shall strictly comply with GB/T772-2005 Technical Conditions for High Voltage Insulator Porcelain Parts and B/T6746. Manufacture of Porcelain Insulators for Electrostatic Precipitators (3-1993). Porcelain bushing is suitable for use under working conditions with a working temperature of 500 ℃, a DC working voltage of 72KV to 110KV, and an altitude of no more than 1000m at the installation site. The outer surface is unglazed and the two ends are ground.
When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porcelain bottle and installation location are clean and dry, free of moisture such as oil stains, and check whether the voltage meets the requirements) before operating the equipment. Sudden temperature rise and drop can cause the porcelain bottle to explode due to temperature differences.

 

锥型(直流电压72-130KV)可按需方尺寸定制
Cone type (DC voltage 72-130KV) Can be customized according to the size of the buyer
*TA-235/JW YP(600*370*270),*TB-352/JW YP(600*520*330),TB-272/JW YP(700*487*264),TB-439/JW YP(500*455*315),TB-256A/JW YP(500*375*270),#TB-660/JW YP(660*520*275),TB-302/JW YP(400*460*270)

95瓷套QEB87/CJW,95瓷瓷套JD330-52-60,95瓷瓷套筒XTL/J09627φ330*520,95瓷套带加热器防露JH072/500DV-4F,95瓷套QE86B/JWA,95瓷套管JD27-37-60,95瓷锥形瓷套JZTφ370-600,95瓷套QE-75/B95,95瓷套JD26-48-70,95瓷瓷套管JZTφ487-700,瓷套XTL/09629-X,95瓷套筒JH-120/500DⅡ-9,承压瓷套JH-120-500DV-3FL,防露型支撑瓷套XTL-J096503F,静电除尘器备件\绝缘子 \T515-4承压绝缘子主要材质:陶瓷 A-50高 500耐压>108kv室温下压缩破坏负荷>500KN